Iijima Products

The Iijima “M” Series press is an excellent value and has been the number one selling High Speed Hot Foil Stamping machine for over the past four years. In the heart of every Iijima press lies a reverence for craftsmanship. Each technician at Iijima has honed his craft for years before being invited to join the elite team of master technicians who assemble every Iijima press. Each press is hand assembled and inspected at our factory in Koga, Japan and manufactured to your specifications.

Since our founding 75 years ago, the Iijima family has relentlessly pursued the pinnacle of detail and quality so intense that the end product surpasses all others. By developing new technologies and products, Iijima will raise customer satisfaction to a realm of customer kândo. Iijima is committed to being the leader in foil stamping and die cutting technology throughout the world.

Iijima HSS-I High Speed Feeder

Hot Foil Feeder for Hot Foil Stamper Iijima MJ 1040ES

  • Quad Suction Pick Up Suckers
  • Adjustable Air Flow System with Front and Side Blowers
  • Laser Double Sheet Detector

Foil Advance System

Hot Foil Advance System for Hot Foil Stamper Iijima MJ 1040ES

  • Servo On/Off Automatic Impression System
  • Digital Direct Drive Foil System with Bell Curve Technology
  • Two Draw Servo Foil Advance System
  • Servo On/Off Automatic Impression System
  • Jet to Jet Air Blast System
  • Convertible- Foil Cassette Removal System
  • Touch Screen Controlled Digital Intelligence System for Monitoring Stamping Pressure

Iijima Feed Table

Iijima Hot Foil Feeder for Hot Foil Stamper Iijima MJ 1040ES

  • Stainless Steel Feeder Table
  • Two Push/ Pull Side Guides (O.S. & O.O.S)
  • Digital Register Indicator with Infra-Red Reader

Foil Brush Removal System

Hot Foil Brush Removal for Hot Foil Stamper Iijima MJ 1040ES

  • Four (4) brushes carrying out waste leaf from the delivery frame

Optional Equipment

  • Feeder Auto Pile Position System
  • Feeder Auto Jogging System
  • Feeder Belt Slow Down
  • Feeder Pre Pile System
  • Intermittent Feeding Apparatus
  • Lower Platen Heating System (For Thermal Cutting & Creasing)
  • Plastic Application System
  • Hologram System
  • Foil Break Detection System
  • Tape Inserter
  • Air Control System for Thin Materials
  • Honey Comb Chases
  • Die Cutting Chases
  • Chase Changer
  • Additional Touch Screen Panel at Delivery

Iijima MJ 1040-ES Standard Features

  • 8000 IPH
  • 330 Tons of Pressure
  • Touch Screen Control
  • New Iijima High Speed Feeding System (HSS-I)
  • Feeder Color Scanner
  • Laser Double Sheet Detector
  • Bi-Directional Foil Pull (Foil Travel with Sheet or Against Sheet feed direction)
  • On/Off Automatic Impression System
  • Over Tonnage Protection System
  • Air Blast System
  • 2-6 Draw Foil Cassettes available
  • Direct Drive Servo
  • Telescopic Foil Roll Change System
  • 12 Zone Digitally Controlled Heating System (With Guardian System)
  • Honey Comb Chase
  • Embossing Package with quick make-ready plates
  • Die Cutting Chase
  • Complete Stripping Equipment
  • Foil Brush Removal System
  • 300 mm Elevation Package
  • One Touch Non-Stop Delivery System
  • Job Change Over in less then 30 minutes
  • Extremely Accurate Registration
  • Shorter Make Ready Time

Downloads:

Iijima MJ 1040-ES Brochure

Iijima MJ 820 Brochure

DGM Iijima Videos

Iijima Press Honeycomb Chase for Hot Foil Stamper Iijima MJ 1040ESIijima Non Stop Video Hot Foil Stamper Iijima MJ 1040ES

NEW Iijima MJ Foil Hot foil stamping 7000sphIijima Non Stop Video Hot Foil Stamper Iijima MJ 1040ES

Other Sizes Offered by Iijima Include:

Iijima 660
Available for High Speed Foil Stamping, Embossing, Die Cutting, Stripping and Blanking

Iijima 820
Available for High Speed Embossing, Die Cutting and Stripping

Iijima 1040
Available for High Speed Foil Stamping, Embossing, Die Cutting, Stripping and Blanking

Iijima 1300
Available for High Speed Foil Stamping, Embossing, Die Cutting, Stripping and Blanking






Iijima Events

.

New Iijima MJ 820

Introduction of the New Iijima MJ 820 High Speed Die Cutting Press

  • Introduction of the New Iijima MJ 820 High Speed
  • Die Cutting Press
  •  

Friends for a long time, Mr. Hayashi and Walter Sussuma

Friends for a long time, Mr Hayashi and Walter Sussuma

  • Friends for a long time, Mr. Hayashi and Walter Sussuma
  • Iijima-MJ-820

Michael DeBard and Mr. Iijima

Michael DeBard and Mr. Iijima

  • Michael DeBard and Mr. Iijima
  • Iijima MJ-820

Iijima-MJ-820-High-Speed-Die-Cutting-Press

Introduction-of-the-New-Iijima-MJ-820-High-Speed-Die-Cutting-Press1.jpg

  • MJ-820-High-Speed-Die-Cutting-Press

Iijima Factory

  • Working on the new press

New Iijima MJ 820

Iijima MJ 820 High Speed Die Cutting Press

  • New Iijima MJ 820 High Speed
  • Die Cutting Press

Iijima MJ 820

Iijima MJ 820 High Speed Die Cutting Press

  • Iijima MJ 820 High Speed Die Cutting Press

Iijima MJ 820 High Speed Die Cutting Press

Michael DeBard and Mr. Iijima

  • Iijima-MJ-820

Iijima Factory

Mr. Iijima and Michael DeBard at the Iijima Factory in Koga Japan April 2018

  • Mr. Iijima and Michael DeBard at the Iijima Factory Japan April 2018

New Iijima MJ-Foil Press

Mr.-Iijima-and-Michael-DeBard-at-the-Iijima-Factory-in-Japan

  • MJ-Foil Press
  • Mr Iijima and Michael Debard at the Iijima factory Koga, Japan October 2018

Iijima MJ-Foil

Michael DeBard and Kondo San at the Iijima Factory in Koga Japan

  • Michael DeBard and Kondo San at the Iijima Factory in Koga, Japan
  • Iijima MJ Hot Foil Stamping, Die Cutting and Embossing Press

Iijima MJ-Foil Press

Walter Sussuma, Mr. Iijima and Paul Torres at the Iijima factory Koga, Japan July 2018

  • Iijima-MJ-Foil, Crankshaft instalation

IGAS July 2018 Tokyo, Japan

Mr. Iijima and Michael DeBard at the Iijima Factory in Koga Japan April 2018

  • Michael DeBard, Mr. Zwiener, Walter Sussuma and Paul Torres at the Iijima Factory Japan
  • July 2019 Tokyo, Japan