Visit the IIJIMA Web site www.iijima-mfg.com

Think finishing equipment, Think customer service, Think Diversified Graphic Machinery Iijima Corporate outline

MESSAGE FROM THE PRESIDENT

“At Iijima, we let technology do the talking. Our cutting-edge automatic die-cutters, foil stampers, and creasers are renowned worldwide. Each and every machine sent out from our factory speaks volumes about our commitment to quality and attention to detail. For over 40 years, we have provided customers with the most innovative technology in the industry and a competitive advantage in a growing global market.
Indeed, our customers are our greatest asset. We remain committed to developing new technology and solutions to serve their needs and provide opportunity for success.”

President
Hajime Iijima

The Iijima MJ-1040 ES Series Hot Foil
Stamper & Die-Cutter

Since its inception, the Iijima MJ Series has been recognized as the best Foil Stamping Press in the business. And now, it’s even better. In 2006, an advanced, high-speed feeding system (HSS-I) was added along with a number of upgrades for operator convenience; the result is a machine that now allow a press change-over time of less than 30 minutes. If you demand the very best for your business and a machine that performs with the technology of a printing press, there is simply no substitute for the Iijima MJ Series.

*Machine shown is the Iijima MJ 1040-ES (Convertible)

• 8000 IPH
• 330 Tons of Pressure
• Touch Screen Control
• New Iijima High Speed Feeding System (HSS-I)
• Feeder Color Scanner
• Laser Double Sheet Detector
• Bi-Directional Foil Pull (Foil Travel with Sheet or Against Sheet feed
  direction)
• On/Off Automatic Impression System
• Over Tonnage Protection System
• Air Blast System
• 2-6 Draw Foil Cassettes available
• Direct Drive Servo
• Telescopic Foil Roll Change System
• 12 Zone Heating System (With Guardian System)
• Honey Comb Chase
• Embossing Package with quick make-ready plates
• Die Cutting Chase
• Complete Stripping Equipment
• Foil Brush Removal System
• 300 mm Elevation Package
• One Touch Non-Stop Delivery System
• Job Change Over in less then 30 minutes
• Extremely Accurate Registration
• Shorter Make Ready Time

• Feeder Auto Pile Position System
• Feeder Auto Jogging System
• Feeder Belt Slow Down
• Feeder Pre Pile System
• Intermittent Feeding Apparatus
• Lower Platen Heating System (*For Thermal Cutting & Creasing)
• Plastic Application System
• Hologram System
• Foil Break Detection System
• Tape Inserter
• Air Control System for Thin Materials
• Honey Comb Chases
• Die Cutting Chases

CONVERTIBLE HOT FOIL STAMPER & DIE-CUTTER MJ-1040E.S

Equipped for fully automatic foil stamping, embossing, die-cutting, creasing, as well as stripping of internal waste and the side and rear sheet edges, with pilling of the processed sheets. It takes less then 30 minutes to change from die cutting to hot foil stamping.

Foil Feed Cassette

• 3 controlled pull rollers
• 2 reel shafts.for foil rolls up to 200 mm diameter
• Computer touch screen control
• Unit frame can be drawn out to the drive side

Heating System

• 12 controlled heat zone(50?C~180?C)
• Heating upper bolster with cartridge heaters
• Honeycomb chase
• Embossing Package

Foil Brush Removal

• Four (4) brushes carrying out waste leaf from the delivery frame

Pressure Releasing Device

• Auto on/off Impression Stamping pressure is released automatically if sheet is not in detected
• Servo Drive with ball screw

Air Blast Device

• Releasing foil from sheet after stamping