DCH 200 – AUTOMATIC DIE CUTTER FOR PAPERBOARD
The exit is also equipped with a WASTE EJECTION and OPENING DEVICE. Quick changeovers are facilitated by fixed references. When die-cutting, nicks between the cut product and the waste are not required, thereby making the execution of the job easier and more precise, consequently improving in quality. Operation is by touch-screen panel with pictogram control. By using the interchangeable steel die plate and always keeping the same centred references, the execution of repeated jobs is simplified. Ideal for processing light and heavy paperboard.
Height of pile at the in-feeding: 1000 mm. Including pallet height.
Process possibilities: cutting, creasing, embossing, blind embossing (Braille), Kiss-cut applications including stickers.
- Compact automatic die-cutter, robustly constructed
- NO STOP production
- Short set-up times and easy make-ready
The unit works horizontally, with sheet transport to the die cut station achieved by the means of the driving clamps. This innovative method ensures excellent quality and results, and adds more value to the finished job. DCH200 allows both the traditional way of die cutting a full sheet and our proposal of die cutting by MULTISHAPE on the same sheet. This way reduces setting time, cost of the die cutting tool and patching time. Thus the unit is particularly suitable for use by printers who will satisfy the die cutting market needs from small to medium runs.
DCH 60 – AUTOMATIC DIE CUTTER FOR PAPERBOARD AND CARDBOARD. FAST MACHINE SET-UP TIMES. POSSIBILITY OF HOT FOIL STAMPING
The machine works on the horizontal plane– the material is transported under the press by the clamps which work on the side opposite the printing reference marks. The die cutting does not leave any points connecting the finished product with the waste – aiding operation and increasing product quality. It is easy to set up the machine for repeat jobs thanks to easy-swap die boards, maintaining the same centre references and saving all HMI display settings. The multi-shape die cutting function reduces machine set–up times and die costs. The machine features a waste removal system at its exit and requires no other accessories.
Quick die change thanks to the fixed reference point. High-stack feeder compatible. Machine operation using the icon-based touch screen HMI.
These unique features make the DCH60 especially well suited to printers who need to replace old cylinder and flat bed machines, and to converting businesses who need flexibility to handle small/medium
sized production batches.
Paper, card, cardboard and some types of plastic. Particularly suitable for die cutting, scoring and kiss-cutting thanks to the possibility of fine adjusting the cut point. Embossing and Braille printing is also possible, as is hot foil stamping.
Max die cutting area 350 x 500 mm
Waste min/max:Direction of travel waste: min 9 mm
Lateral direction waste: min 10 mm
TWO POSSIBILITIES FOR MAXIMUM FORMAT SIZE:
Max sheet size (Width x length) 550 x 380 mm
Multiple stroke (If the characteristics of the sheet and product allow)
Max sheet size (Width x length) 550 x 710 mm
Min sheet size: 220 x 220 mm
Min./Max. thickness of material paper, card etc. (Depends on the material type) da 120 g/m² a 4 mm
Power: 8 kW.
Cutting force: Paper – card 60 ton ( 600000 N ) with 350 g/m²
Max working speed (Dependent on number up): single stroke up to 1800 sheets/hour
(The speed and the format depends on the format, the product type, material quality, operator skill and general conditions)
Compressed air requirements: (to be supplied by the client) 250 l/min a 6 bar.
Electrical connection: 3PH, 400 V + N + T, 50 Hz.
(Neutral and earth must be separate; if this is not possible, a transformer may be requested at additional cost)
Machine dimensions (LxDxH): 2650 x 1750 x 1915 mm
Machine dimensions with feeder, separation and collection belts: 6240 x 1750 x 1915 mm
Machine weight: 2200 kg.